Power Boat Covers

The ‘SeaCover’ is ideal to cover and protect your boat against rain, dust and sun when you don’t use it. It combines high construction standards with high quality materials. Made from extra strong PA coated Nylon 300D for maximum water resistance, it features an elastic cord all around for ideal fit and double stitched seams for long lasting use. Additionally, it has non-scratching aluminium D-rings for extra hull protection. The ‘SeaCover’ can be used in fishing or recreational boats, inflatable or motorboats, with or without cockpit and rails. It is available in silver colour and in 4 sizes depending on the dimensions of the boat.

Available in 4 sizes:
Size 1: Length (cm) 427-488 Width (cm) 180 Colour Silver
Size 2: Length (cm) 427-488 Width (cm) 229 Colour Silver
Size 3: Length (cm) 488-564 Width (cm) 239 Colour Silver
Size 4: Length (cm) 518-579 Width (cm) 244 Colour Silver

Installation Instructions

- Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover
- Drape the cover over the entire boat, starting at the bow
- Pull the cover over the rub rail around the entire boat
- Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover
- Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat
- When you finish fasten with a knot the two ends of the nylon rope
- Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer
- Do the same with the second stretching cord on the other side of the boat

Maintenance and Cleaning

To keep the ‘SeaCover’ clean and protected when not in use a storage bag is included.
To extend the products’ life clean it with a soft bristle brush and lukewarm water. NEVER use soap as it may damage the protective coating of the ‘SeaCover’. ALWAYS leave to dry completely before storing it.
SRP - £56.99
More details

The ‘SeaCover’ is ideal to cover and protect your boat against rain, dust and sun when you don’t use it. It combines high construction standards with high quality materials. Made from extra strong PA coated Nylon 300D for maximum water resistance, it features an elastic cord all around for ideal fit and double stitched seams for long lasting use. Additionally, it has non-scratching aluminium D-rings for extra hull protection. The ‘SeaCover’ can be used in fishing or recreational boats, inflatable or motorboats, with or without cockpit and rails. It is available in silver colour and in 4 sizes depending on the dimensions of the boat.

Available in 4 sizes:
Size 1: Length (cm) 427-488 Width (cm) 180 Colour Silver
Size 2: Length (cm) 427-488 Width (cm) 229 Colour Silver
Size 3: Length (cm) 488-564 Width (cm) 239 Colour Silver
Size 4: Length (cm) 518-579 Width (cm) 244 Colour Silver

Installation Instructions

- Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover
- Drape the cover over the entire boat, starting at the bow
- Pull the cover over the rub rail around the entire boat
- Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover
- Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat
- When you finish fasten with a knot the two ends of the nylon rope
- Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer
- Do the same with the second stretching cord on the other side of the boat

Maintenance and Cleaning

To keep the ‘SeaCover’ clean and protected when not in use a storage bag is included.
To extend the products’ life clean it with a soft bristle brush and lukewarm water. NEVER use soap as it may damage the protective coating of the ‘SeaCover’. ALWAYS leave to dry completely before storing it.
SRP - £69.99
More details

The ‘SeaCover’ is ideal to cover and protect your boat against rain, dust and sun when you don’t use it. It combines high construction standards with high quality materials. Made from extra strong PA coated Nylon 300D for maximum water resistance, it features an elastic cord all around for ideal fit and double stitched seams for long lasting use. Additionally, it has non-scratching aluminium D-rings for extra hull protection. The ‘SeaCover’ can be used in fishing or recreational boats, inflatable or motorboats, with or without cockpit and rails. It is available in silver colour and in 4 sizes depending on the dimensions of the boat.

Available in 4 sizes:
Size 1: Length (cm) 427-488 Width (cm) 180 Colour Silver
Size 2: Length (cm) 427-488 Width (cm) 229 Colour Silver
Size 3: Length (cm) 488-564 Width (cm) 239 Colour Silver
Size 4: Length (cm) 518-579 Width (cm) 244 Colour Silver

Installation Instructions

- Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover
- Drape the cover over the entire boat, starting at the bow
- Pull the cover over the rub rail around the entire boat
- Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover
- Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat
- When you finish fasten with a knot the two ends of the nylon rope
- Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer
- Do the same with the second stretching cord on the other side of the boat

Maintenance and Cleaning

To keep the ‘SeaCover’ clean and protected when not in use a storage bag is included.
To extend the products’ life clean it with a soft bristle brush and lukewarm water. NEVER use soap as it may damage the protective coating of the ‘SeaCover’. ALWAYS leave to dry completely before storing it.
SRP - £78.99
More details

The ‘SeaCover’ is ideal to cover and protect your boat against rain, dust and sun when you don’t use it. It combines high construction standards with high quality materials. Made from extra strong PA coated Nylon 300D for maximum water resistance, it features an elastic cord all around for ideal fit and double stitched seams for long lasting use. Additionally, it has non-scratching aluminium D-rings for extra hull protection. The ‘SeaCover’ can be used in fishing or recreational boats, inflatable or motorboats, with or without cockpit and rails. It is available in silver colour and in 4 sizes depending on the dimensions of the boat.

Available in 4 sizes:
Size 1: Length (cm) 427-488 Width (cm) 180 Colour Silver
Size 2: Length (cm) 427-488 Width (cm) 229 Colour Silver
Size 3: Length (cm) 488-564 Width (cm) 239 Colour Silver
Size 4: Length (cm) 518-579 Width (cm) 244 Colour Silver

Installation Instructions

- Use a cloth or sponge to cover all sharp areas (such as corners and edges) in order to avoid tearing the cover
- Drape the cover over the entire boat, starting at the bow
- Pull the cover over the rub rail around the entire boat
- Starting from the bow, tie one end of the nylon rope (supplied with your boat cover) to the O-ring that is located at the bottom hem of your cover
- Then pass the rope from the next O-ring and continue as such with all the O-rings around the boat
- When you finish fasten with a knot the two ends of the nylon rope
- Choosing one of the O-rings located in the middle of one boat’s side, tie there one end of the black stretching cord (supplied with your boat cover) and the other to the trailer
- Do the same with the second stretching cord on the other side of the boat

Maintenance and Cleaning

To keep the ‘SeaCover’ clean and protected when not in use a storage bag is included.
To extend the products’ life clean it with a soft bristle brush and lukewarm water. NEVER use soap as it may damage the protective coating of the ‘SeaCover’. ALWAYS leave to dry completely before storing it.
SRP - £89.99
More details