| Icom IC-M35 Buoyant Hand Held VHF ATIS Ready Part No: SM330-M35
Icom IC-M35 Buoyant Hand Held VHF ATIS Ready FEATURES CLEAR VOICE BOOST (Clear Voice + Voice Boost) In marine environments there are many sources of noise that can affect the quality of your communications, such as engine noise, roar of the waves etc. The IC-M35 automatically adjusts the outgoing voice and the incoming audio to compensate for the ambient noise level: whether you're in a loud environment or in a quiet area, the Icom M35 ensures your radio conversation is sent and received as clearly as possible. LOUD button When you need an instant boost in the volume, a simple push of the LOUD button gives you full volume immediately. In addition, holding the LOUD button mutes the audio output. Noise cancelling microphone The sub-microphone on the rear panel inverts phase and cancels out ambient noise from the main microphone. As a result, the IC-M35 reduces the affect of background noise (particularly trebly noise) from the transmitted signal and makes it easier to catch voice communication. Automatic volume adjustment In a high noise environment, the sub-microphone detects the ambient noise and the IC-M35 automatically increases the volume output to suit the surrounding environment. 700mW audio output The IC-M35 employs a bridge-tied load (BTL) audio amplifier to increase the audio output power. The internal speaker delivers a loud 700mW (typical) audio output with clear sound even in noisy environments. And yes, it floats too! Just like the IC-M33, the IC-M35 floats in the water. If the radio is dropped over the side, it will come to the surface so you can retrieve it. As the radio has a rugged, waterproof body, it will keep on working even after it has been submerged. * 1m depth for 30 minutes, equivalent to IPX7. Please note that the IC-M35 is not designed to be used under the water. 6W RF output with low power consumption Although the IC-M35 delivers a high 6W RF output and 700mW audio output, its current saving circuit offers 8 hours* of operating time with the supplied 980mAh Lithium-Ion battery pack. * Typical operation with Tx (Hi): Rx: standby=5:5:90 Large buttons and slim dimensions The IC-M35 has large, easy-to-operate buttons that provides intuitive operation. A slender design body makes it extremely natural to handle. Easy to see LCD with large channel indication The IC-M35 has an easy to see large LCD (32 x 16 mm) with a clear 2-digit channel number indication. The LCD is laid out on the top of the front panel not to be covered with your hand. LCD and key backlighting is standard for night time operation. Please Note: The noise cancellation can produce little or no effect in some conditions depending on type of noise, or the position and distance between the noise source and the microphone, etc. The noise cancellation does not work when an optional external speaker-microphone is connected. Other Features
Keypad backlighting
Waterproof construction equivalent to IPX7 (1m depth for 30 minutes)
Optional battery case for use with alkaline cells (The IC-M35 floats flat when this battery case is connected) Dual/Tri-watch functions
4-step battery life indicator
Auto scan function
Instant access to Ch 16 or programmable call channel
Soft flexible antenna supplied
Quick channel selection with Favourite channel function
AquaQuake draining function
£169.99
RRP £203.42 - (Save £33.43)
When shipped on its own, delivery cost (UK Mainland) for this item is: £4.95
Total shipping costs are shown in the checkout before you commit to purchase.
|
Related products:
Icom BP-251 Battery Case M33/M35 | ATIS Programming Charge | Icom BNC.021 M31/M33/M35 Antenna Adaptor | Icom Charger UK Mains for AD-95 (std) For M1EuroV / M71 / M87 | Icom BC-145 Mains Adaptor | Icom BC162 Single Desktop Rapid Charger | Icom Regular trickle charger. Charges BP-252 (requires BC-174UK) | Icom BP-252 Battery Pack 980mAh M31/M33/M35 | Icom HM-165 Waterproof Speaker Microphone | Icom Belt Clip MB-109 | Icom Replacement Antenna for M33/M35 | |
| 
