Tercoo Combination Adjustable Guide with Dust Cover - Includes Vacuum Attachment

Drill not included

Adjustable guide with dustcover for removing gelcoat with the TERCOO rotating blaster. Can be used on a standard drill. Excellent roughness for the adhesive of a new coating. Connection to a vacuum cleaner will make sure the dust will not travel around in the air. Made of polycarbonate and stainless steel.

Use the clean, modern and environmentally safe way to remove fiberglass gelcoats without the dangerous and messy use of chemicals.
Remove damaged fiberglass gelcoats resulting from osmosis or other intrusions.
It is essential to use the Tercoo Guide when removing fiberglass gelcoats to prevent gouging the fiberglass base.

The Tercoo Guide includes a 3 point depth control system.
The Tercoo Guide works with many electric drills that have a round drill neck at least one-half inch wide and a drill neck diameter range between 42.65 to 43.50mm
By using the Tercoo  Guide with its three point adjustable depth control system, not only can you clean steel, iron, concrete, and stone, but fiberglass as well.

Using Tercoo  rotating blaster discs in conjunction with the Tercoo Guide and its adjustable depth control and dust containment system enables the operator to clean fiberglass or remove its gelcoat.

Use with SINGLE, DOUBLE or TRIPLE discs
Increases disc life
Cleans all materials and removes rust
Also use only for depth control or dust containment